Investigation of CMOS multiplexer jet matrix addressing and micro-droplets within a printhead chip

Jian Chiun Liou, Cheng Fu Yang

研究成果: 雜誌貢獻文章同行評審

2 引文 斯高帕斯(Scopus)


In this study, we demonstrate and investigate a new droplet injection design. We create a thermal inkjet (TIJ) printhead using an application-specific integrated circuit system and bulk micromachining technology (microelectromechanical systems). We design inkjet printhead chips with a new structure and investigate their properties. For the new structure, the integration of complementary metal-oxide-semiconductors (MOSs) and enhancement-mode devices, as well as power switches and a TIJ heater transducer, enables logic functions to be executed on-chip. This capability is used in the proposed design to address individual jets with even fewer input lines than in matrix addressing. A high number of jets (at least 896) can be addressed with only 11 input lines. E1 (Enable 1) and E2 (Enable 2) are set up dependently, and they have the ability to reverse their signals in relation to each other (i.e., if E1 is disabled, E2 is enabled and vice versa). The E1 and E2 signals each service 448 jets. If one of the MOSs is turned on, then it corresponds to a power line with a similar function. If an addressing gate terminal of the other MOS has a discharge action, then we can control a different heater to generate heating bubbles in the jet inks. The operating frequency for addressing these measurements is 18 kHz in normal mode, 26 kHz in draft mode, and 16 kHz in best mode.
出版狀態已發佈 - 11月 29 2017

ASJC Scopus subject areas

  • 控制與系統工程
  • 機械工業
  • 電氣與電子工程


深入研究「Investigation of CMOS multiplexer jet matrix addressing and micro-droplets within a printhead chip」主題。共同形成了獨特的指紋。