Glass forming ability in amorphous Ti50Cu35-xNi 15Snx alloys prepared by mechanical alloying

C. K. Lin; C. C. Hsu; R. R. Jeng; Y. L. Lin; C. H. Yen; P. Y. Lee

Glass forming ability in amorphous Ti50Cu35-xNi 15Snx alloys prepared by mechanical alloying

C. K. Lin, C. C. Hsu, R. R. Jeng, Y. L. Lin, C. H. Yen, P. Y. Lee

研究成果: 雜誌貢獻 › 文章 › 同行評審

摘要

In the present study, amorphous Ti50Cu35-xNi 15Snx (x=0-7) alloy powders were synthesized by mechanical alloying technique, the amorphization behavior of ti50cu 28sn7 alloy powders was examined in details by scanning electron microscopy, differential scanning calorimeter, x-ray diffraction, and synchrotron x-ray absorption spectroscopy. the results show that fully amorphous powders formed after 7 hours of milling. The thermal stability of the Ti 50Cu35-xNi15Snx amorphous powders was investigated by differential scanning calorimeter. The amorphous Ti 50Cu35Ni15 powders (i.e., x=0) exhibit no glass transition behavior. However, the amorphous Ti50Cu 35-xNi15Snx (x=3-7) powders were found to exhibit a supercooled liquid region before crystallization. Amorphous Ti 50Cu28Ni15Sn7 alloy powders exhibits a wide supercooled liquid region of 61 K.

原文	英語
頁（從 - 到）	3451-3458
頁數	8
期刊	Materials Science Forum
卷	475-479
發行號	V
出版狀態	已發佈 - 2005
對外發佈	是

ASJC Scopus subject areas

材料科學(全部)

其它文件與鏈接

引用此

@article{5489077e4f1d4c6e95ee6c9681c31c74,

title = "Glass forming ability in amorphous Ti50Cu35-xNi 15Snx alloys prepared by mechanical alloying",

abstract = "In the present study, amorphous Ti50Cu35-xNi 15Snx (x=0-7) alloy powders were synthesized by mechanical alloying technique, the amorphization behavior of ti50cu 28sn7 alloy powders was examined in details by scanning electron microscopy, differential scanning calorimeter, x-ray diffraction, and synchrotron x-ray absorption spectroscopy. the results show that fully amorphous powders formed after 7 hours of milling. The thermal stability of the Ti 50Cu35-xNi15Snx amorphous powders was investigated by differential scanning calorimeter. The amorphous Ti 50Cu35Ni15 powders (i.e., x=0) exhibit no glass transition behavior. However, the amorphous Ti50Cu 35-xNi15Snx (x=3-7) powders were found to exhibit a supercooled liquid region before crystallization. Amorphous Ti 50Cu28Ni15Sn7 alloy powders exhibits a wide supercooled liquid region of 61 K.",

keywords = "Amorphization, EXAFS, Glass transition, Mechanical alloying, Supercooled liquid region, Ti-based alloys",

author = "Lin, {C. K.} and Hsu, {C. C.} and Jeng, {R. R.} and Lin, {Y. L.} and Yen, {C. H.} and Lee, {P. Y.}",

year = "2005",

language = "English",

volume = "475-479",

pages = "3451--3458",

journal = "Materials Science Forum",

issn = "0255-5476",

publisher = "Trans Tech Publications",

number = "V",

}

TY - JOUR

T1 - Glass forming ability in amorphous Ti50Cu35-xNi 15Snx alloys prepared by mechanical alloying

AU - Lin, C. K.

AU - Hsu, C. C.

AU - Jeng, R. R.

AU - Lin, Y. L.

AU - Yen, C. H.

AU - Lee, P. Y.

PY - 2005

Y1 - 2005

N2 - In the present study, amorphous Ti50Cu35-xNi 15Snx (x=0-7) alloy powders were synthesized by mechanical alloying technique, the amorphization behavior of ti50cu 28sn7 alloy powders was examined in details by scanning electron microscopy, differential scanning calorimeter, x-ray diffraction, and synchrotron x-ray absorption spectroscopy. the results show that fully amorphous powders formed after 7 hours of milling. The thermal stability of the Ti 50Cu35-xNi15Snx amorphous powders was investigated by differential scanning calorimeter. The amorphous Ti 50Cu35Ni15 powders (i.e., x=0) exhibit no glass transition behavior. However, the amorphous Ti50Cu 35-xNi15Snx (x=3-7) powders were found to exhibit a supercooled liquid region before crystallization. Amorphous Ti 50Cu28Ni15Sn7 alloy powders exhibits a wide supercooled liquid region of 61 K.

AB - In the present study, amorphous Ti50Cu35-xNi 15Snx (x=0-7) alloy powders were synthesized by mechanical alloying technique, the amorphization behavior of ti50cu 28sn7 alloy powders was examined in details by scanning electron microscopy, differential scanning calorimeter, x-ray diffraction, and synchrotron x-ray absorption spectroscopy. the results show that fully amorphous powders formed after 7 hours of milling. The thermal stability of the Ti 50Cu35-xNi15Snx amorphous powders was investigated by differential scanning calorimeter. The amorphous Ti 50Cu35Ni15 powders (i.e., x=0) exhibit no glass transition behavior. However, the amorphous Ti50Cu 35-xNi15Snx (x=3-7) powders were found to exhibit a supercooled liquid region before crystallization. Amorphous Ti 50Cu28Ni15Sn7 alloy powders exhibits a wide supercooled liquid region of 61 K.

KW - Amorphization

KW - EXAFS

KW - Glass transition

KW - Mechanical alloying

KW - Supercooled liquid region

KW - Ti-based alloys

UR - http://www.scopus.com/inward/record.url?scp=17144398464&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=17144398464&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:17144398464

SN - 0255-5476

VL - 475-479

SP - 3451

EP - 3458

JO - Materials Science Forum

JF - Materials Science Forum

IS - V

ER -

Glass forming ability in amorphous Ti50Cu35-xNi 15Snx alloys prepared by mechanical alloying

摘要

ASJC Scopus subject areas

其它文件與鏈接

指紋

引用此