Analysis on warpage of support structure of computer hard disk for optimum processing by precision injection molding

Yung Ning Wang; Her Shing Wang; Wen Tsung Ho; Yi Lin; Yung Kang Shen

Analysis on warpage of support structure of computer hard disk for optimum processing by precision injection molding

Yung Ning Wang, Her Shing Wang, Wen Tsung Ho, Yi Lin, Yung Kang Shen

研究成果: 書貢獻/報告類型 › 會議貢獻

摘要

This study emphasizes on warpage of support structure of computer hard disk for optimum processing by precision injection molding. Firstly, the authors use Moldflow software to analyze the runner's balance on multi-cavities for the support structure of computer hard disk. Then this study accords to these data to manufacture the real mold. This study uses different processing parameters (injection speed, injection pressure, mold temperature, packing time and melt temperature) to fabricate support structure of computer hard disk using precision injection molding. The authors use Taguchi method to find out which factor is more important for warpage of support structure of computer hard disk. The results show that the most important factor for warpage of support structure is followed by packing time, injection speed, melt temperature, packing time and the last one is the injection pressure.

原文	英語
主出版物標題	Information Technology and Computer Application Engineering - Proceedings of the 2013 International Conference on Information Technology and Computer Application Engineering, ITCAE 2013
發行者	shers
頁面	811-814
頁數	4
出版狀態	已發佈 - 2014
事件	2013 International Conference on Information Technology and Computer Application Engineering, ITCAE 2013 - Hong Kong, 中國持續時間: 8月 27 2013 → 8月 28 2013

其他

其他	2013 International Conference on Information Technology and Computer Application Engineering, ITCAE 2013
國家/地區	中國
城市	Hong Kong
期間	8/27/13 → 8/28/13

ASJC Scopus subject areas

電腦科學應用

其它文件與鏈接

引用此

Wang, Y. N., Wang, H. S., Ho, W. T., Lin, Y., & Shen, Y. K. (2014). Analysis on warpage of support structure of computer hard disk for optimum processing by precision injection molding. 於 Information Technology and Computer Application Engineering - Proceedings of the 2013 International Conference on Information Technology and Computer Application Engineering, ITCAE 2013 (頁 811-814). shers.

Analysis on warpage of support structure of computer hard disk for optimum processing by precision injection molding. / Wang, Yung Ning; Wang, Her Shing; Ho, Wen Tsung 等.
Information Technology and Computer Application Engineering - Proceedings of the 2013 International Conference on Information Technology and Computer Application Engineering, ITCAE 2013. shers, 2014. p. 811-814.

研究成果: 書貢獻/報告類型 › 會議貢獻

Wang, YN, Wang, HS, Ho, WT, Lin, Y & Shen, YK 2014, Analysis on warpage of support structure of computer hard disk for optimum processing by precision injection molding. 於 Information Technology and Computer Application Engineering - Proceedings of the 2013 International Conference on Information Technology and Computer Application Engineering, ITCAE 2013. shers, 頁 811-814, 2013 International Conference on Information Technology and Computer Application Engineering, ITCAE 2013, Hong Kong, 中國, 8/27/13.

Wang YN, Wang HS, Ho WT, Lin Y, Shen YK. Analysis on warpage of support structure of computer hard disk for optimum processing by precision injection molding. 於 Information Technology and Computer Application Engineering - Proceedings of the 2013 International Conference on Information Technology and Computer Application Engineering, ITCAE 2013. shers. 2014. p. 811-814

Wang, Yung Ning ; Wang, Her Shing ; Ho, Wen Tsung 等. / Analysis on warpage of support structure of computer hard disk for optimum processing by precision injection molding. Information Technology and Computer Application Engineering - Proceedings of the 2013 International Conference on Information Technology and Computer Application Engineering, ITCAE 2013. shers, 2014. 頁 811-814

@inproceedings{80864215f8e5432d8a8363fa504d00b2,

title = "Analysis on warpage of support structure of computer hard disk for optimum processing by precision injection molding",

abstract = "This study emphasizes on warpage of support structure of computer hard disk for optimum processing by precision injection molding. Firstly, the authors use Moldflow software to analyze the runner's balance on multi-cavities for the support structure of computer hard disk. Then this study accords to these data to manufacture the real mold. This study uses different processing parameters (injection speed, injection pressure, mold temperature, packing time and melt temperature) to fabricate support structure of computer hard disk using precision injection molding. The authors use Taguchi method to find out which factor is more important for warpage of support structure of computer hard disk. The results show that the most important factor for warpage of support structure is followed by packing time, injection speed, melt temperature, packing time and the last one is the injection pressure.",

keywords = "Numerical simulation, Optimum processing, Precision injection molding, Warpage",

author = "Wang, {Yung Ning} and Wang, {Her Shing} and Ho, {Wen Tsung} and Yi Lin and Shen, {Yung Kang}",

year = "2014",

language = "English",

pages = "811--814",

booktitle = "Information Technology and Computer Application Engineering - Proceedings of the 2013 International Conference on Information Technology and Computer Application Engineering, ITCAE 2013",

publisher = "shers",

note = "2013 International Conference on Information Technology and Computer Application Engineering, ITCAE 2013 ; Conference date: 27-08-2013 Through 28-08-2013",

}

TY - GEN

T1 - Analysis on warpage of support structure of computer hard disk for optimum processing by precision injection molding

AU - Wang, Yung Ning

AU - Wang, Her Shing

AU - Ho, Wen Tsung

AU - Lin, Yi

AU - Shen, Yung Kang

PY - 2014

Y1 - 2014

N2 - This study emphasizes on warpage of support structure of computer hard disk for optimum processing by precision injection molding. Firstly, the authors use Moldflow software to analyze the runner's balance on multi-cavities for the support structure of computer hard disk. Then this study accords to these data to manufacture the real mold. This study uses different processing parameters (injection speed, injection pressure, mold temperature, packing time and melt temperature) to fabricate support structure of computer hard disk using precision injection molding. The authors use Taguchi method to find out which factor is more important for warpage of support structure of computer hard disk. The results show that the most important factor for warpage of support structure is followed by packing time, injection speed, melt temperature, packing time and the last one is the injection pressure.

AB - This study emphasizes on warpage of support structure of computer hard disk for optimum processing by precision injection molding. Firstly, the authors use Moldflow software to analyze the runner's balance on multi-cavities for the support structure of computer hard disk. Then this study accords to these data to manufacture the real mold. This study uses different processing parameters (injection speed, injection pressure, mold temperature, packing time and melt temperature) to fabricate support structure of computer hard disk using precision injection molding. The authors use Taguchi method to find out which factor is more important for warpage of support structure of computer hard disk. The results show that the most important factor for warpage of support structure is followed by packing time, injection speed, melt temperature, packing time and the last one is the injection pressure.

KW - Numerical simulation

KW - Optimum processing

KW - Precision injection molding

KW - Warpage

UR - http://www.scopus.com/inward/record.url?scp=84900419583&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84900419583&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:84900419583

SP - 811

EP - 814

BT - Information Technology and Computer Application Engineering - Proceedings of the 2013 International Conference on Information Technology and Computer Application Engineering, ITCAE 2013

PB - shers

T2 - 2013 International Conference on Information Technology and Computer Application Engineering, ITCAE 2013

Y2 - 27 August 2013 through 28 August 2013

ER -

Analysis on warpage of support structure of computer hard disk for optimum processing by precision injection molding

摘要

其他

ASJC Scopus subject areas

其它文件與鏈接

指紋

引用此