A linear-response CMOS-MEMS capacitive tactile sensor

C. T. Sun, Y. C. Lin, C. J. Hsieh, J. C. Liou, L. B. Wang, W. C. Tian

研究成果: 書貢獻/報告類型會議貢獻

2 引文 斯高帕斯(Scopus)


A linear-response capacitive tactile sensor is presented in this work. The sensor was fabricated by the TSMC 0.35 μ m CMOS process and our self-developed MEMS post-process. The structure of the sensor consisted of one pair of parallel electrodes, with the central part of the membrane electrode hollowed out. A pillar with four beams at each side was set at the center to support the membrane electrode. This structure enhanced the uniformity of the deflection, and thus improved the linearity of the response. The wider dynamic range was also obtained because of the stiffer structure. In addition, the buckling of the membrane was lessened. The performance of this design was compared with the conventional parallel plate one. The measured linearity was 0.9728, and the dynamic range was 400mmHg, with the relieved buckling of 0.22 μm.
主出版物標題IEEE SENSORS 2012 - Proceedings
出版狀態已發佈 - 2012
事件11th IEEE SENSORS 2012 Conference - Taipei, 臺灣
持續時間: 10月 28 201210月 31 2012


會議11th IEEE SENSORS 2012 Conference

ASJC Scopus subject areas

  • 電氣與電子工程


深入研究「A linear-response CMOS-MEMS capacitive tactile sensor」主題。共同形成了獨特的指紋。