Template assisted fabrication of TiO2 and BaTiO3 nanotubes

Chien Chon Chen; Chin Hua Cheng; Guoyi Tang; Tainan Lin; Chung Kwei Lin

doi:10.4028/www.scientific.net/AMM.271-272.107

Template assisted fabrication of TiO2 and BaTiO3 nanotubes

Chien Chon Chen, Chin Hua Cheng, Guoyi Tang, Tainan Lin, Chung Kwei Lin

Research output: Contribution to journal › Article › peer-review

1 Citation (Scopus)

Abstract

This paper discussed fabrication of TiO₂ and BaTiO₃ nanotubes by sol-gel method and used anodic aluminum oxide (AAO) as template. The mechanical properties of TiO₂ or BaTiO₃ NTs are not great, so a longer tube can crack easily, leading to the peeling off of the NTs film from the Ti substrate. Therefore, we propose to use AAO as a template, followed by deposition of TiO₂ and BaTiO₃ NT inside AAO to make a working electrode for further electronic devices.

Original language	English
Pages (from-to)	107-111
Number of pages	5
Journal	Applied Mechanics and Materials
Volume	271
Issue number	PART 1
DOIs	https://doi.org/10.4028/www.scientific.net/AMM.271-272.107
Publication status	Published - 2013
Event	3rd International Conference on Frontiers of Manufacturing and Design Science, ICFMD 2012 - , Hong Kong Duration: Dec 11 2012 → Dec 13 2012

Keywords

AAO
Anodization
BaTiO
Nanotubes
TiO

ASJC Scopus subject areas

General Engineering

Access to Document

10.4028/www.scientific.net/AMM.271-272.107

Cite this

@article{f2bf00c0b48e46518cd45e7bc15860bb,

title = "Template assisted fabrication of TiO2 and BaTiO3 nanotubes",

abstract = "This paper discussed fabrication of TiO2 and BaTiO3 nanotubes by sol-gel method and used anodic aluminum oxide (AAO) as template. The mechanical properties of TiO2 or BaTiO3 NTs are not great, so a longer tube can crack easily, leading to the peeling off of the NTs film from the Ti substrate. Therefore, we propose to use AAO as a template, followed by deposition of TiO2 and BaTiO3 NT inside AAO to make a working electrode for further electronic devices.",

keywords = "AAO, Anodization, BaTiO, Nanotubes, TiO",

author = "Chen, \{Chien Chon\} and Cheng, \{Chin Hua\} and Guoyi Tang and Tainan Lin and Lin, \{Chung Kwei\}",

year = "2013",

doi = "10.4028/www.scientific.net/AMM.271-272.107",

language = "English",

volume = "271",

pages = "107--111",

journal = "Applied Mechanics and Materials",

issn = "1662-7482",

publisher = "Trans Tech Publications Ltd",

number = "PART 1",

note = "3rd International Conference on Frontiers of Manufacturing and Design Science, ICFMD 2012 ; Conference date: 11-12-2012 Through 13-12-2012",

}

TY - JOUR

T1 - Template assisted fabrication of TiO2 and BaTiO3 nanotubes

AU - Chen, Chien Chon

AU - Cheng, Chin Hua

AU - Tang, Guoyi

AU - Lin, Tainan

AU - Lin, Chung Kwei

PY - 2013

Y1 - 2013

N2 - This paper discussed fabrication of TiO2 and BaTiO3 nanotubes by sol-gel method and used anodic aluminum oxide (AAO) as template. The mechanical properties of TiO2 or BaTiO3 NTs are not great, so a longer tube can crack easily, leading to the peeling off of the NTs film from the Ti substrate. Therefore, we propose to use AAO as a template, followed by deposition of TiO2 and BaTiO3 NT inside AAO to make a working electrode for further electronic devices.

AB - This paper discussed fabrication of TiO2 and BaTiO3 nanotubes by sol-gel method and used anodic aluminum oxide (AAO) as template. The mechanical properties of TiO2 or BaTiO3 NTs are not great, so a longer tube can crack easily, leading to the peeling off of the NTs film from the Ti substrate. Therefore, we propose to use AAO as a template, followed by deposition of TiO2 and BaTiO3 NT inside AAO to make a working electrode for further electronic devices.

KW - AAO

KW - Anodization

KW - BaTiO

KW - Nanotubes

KW - TiO

UR - https://www.scopus.com/pages/publications/84872561560

UR - https://www.scopus.com/inward/citedby.url?scp=84872561560&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/AMM.271-272.107

DO - 10.4028/www.scientific.net/AMM.271-272.107

M3 - Article

AN - SCOPUS:84872561560

SN - 1662-7482

VL - 271

SP - 107

EP - 111

JO - Applied Mechanics and Materials

JF - Applied Mechanics and Materials

IS - PART 1

T2 - 3rd International Conference on Frontiers of Manufacturing and Design Science, ICFMD 2012

Y2 - 11 December 2012 through 13 December 2012

ER -

Template assisted fabrication of TiO2 and BaTiO3 nanotubes

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this