Research of microstructure and mechanical behavior on duplex (α + β) Ti-4.8Al-2.5Mo-1.4V alloy

Pei Wen Peng; Keng Liang Ou; Chih Yeh Chao; Yung Ning Pan; Chau Hsiang Wang

doi:10.1016/j.jallcom.2009.10.133

Research of microstructure and mechanical behavior on duplex (α + β) Ti-4.8Al-2.5Mo-1.4V alloy

Pei Wen Peng, Keng Liang Ou, Chih Yeh Chao, Yung Ning Pan, Chau Hsiang Wang

Research output: Contribution to journal › Article › peer-review

25 Citations (Scopus)

Abstract

The microstructure and mechanical behavior of the duplex Ti-4.8Al-2.5Mo-1.4V (Ti14) alloy were investigated by means of optical microscopy, electron microscopy, experimental model analysis, and hardness and tensile testing. During heat-treatment at between 600 and 1000 °C, the phase transformation sequence was found to be (α + β) → (α + β + α′) → (α′ + α″ + residual β). The (α′ + α″ + residual β) structure exhibited the maximum yield strength (σ_y = 920 MPa), hardness (HR_C 36), and damping coefficient (188.3 × 10^-4). However, the (α + β) structure achieved the greatest elongation (∼15%). It is believed that the lath-like α′ martensite not only increases the tensile strength, but also enhances the hardness of the Ti14 alloy. Moreover, it also plays a crucial role in increasing the damping capacity of the Ti14 alloy.

Original language	English
Pages (from-to)	661-666
Number of pages	6
Journal	Journal of Alloys and Compounds
Volume	490
Issue number	1-2
DOIs	https://doi.org/10.1016/j.jallcom.2009.10.133
Publication status	Published - Feb 4 2010

Keywords

Damping coefficient
Mechanical properties
Microstructure
Titanium alloy
Transmission electron microscopey

ASJC Scopus subject areas

Mechanics of Materials
Mechanical Engineering
Metals and Alloys
Materials Chemistry

Access to Document

10.1016/j.jallcom.2009.10.133

Cite this

@article{c5dd1cafd16640b49674a830c1daee90,

title = "Research of microstructure and mechanical behavior on duplex (α + β) Ti-4.8Al-2.5Mo-1.4V alloy",

abstract = "The microstructure and mechanical behavior of the duplex Ti-4.8Al-2.5Mo-1.4V (Ti14) alloy were investigated by means of optical microscopy, electron microscopy, experimental model analysis, and hardness and tensile testing. During heat-treatment at between 600 and 1000 °C, the phase transformation sequence was found to be (α + β) → (α + β + α′) → (α′ + α″ + residual β). The (α′ + α″ + residual β) structure exhibited the maximum yield strength (σy = 920 MPa), hardness (HRC 36), and damping coefficient (188.3 × 10-4). However, the (α + β) structure achieved the greatest elongation (∼15\%). It is believed that the lath-like α′ martensite not only increases the tensile strength, but also enhances the hardness of the Ti14 alloy. Moreover, it also plays a crucial role in increasing the damping capacity of the Ti14 alloy.",

keywords = "Damping coefficient, Mechanical properties, Microstructure, Titanium alloy, Transmission electron microscopey",

author = "Peng, \{Pei Wen\} and Ou, \{Keng Liang\} and Chao, \{Chih Yeh\} and Pan, \{Yung Ning\} and Wang, \{Chau Hsiang\}",

year = "2010",

month = feb,

day = "4",

doi = "10.1016/j.jallcom.2009.10.133",

language = "English",

volume = "490",

pages = "661--666",

journal = "Journal of Alloys and Compounds",

issn = "0925-8388",

publisher = "Elsevier B.V.",

number = "1-2",

}

TY - JOUR

T1 - Research of microstructure and mechanical behavior on duplex (α + β) Ti-4.8Al-2.5Mo-1.4V alloy

AU - Peng, Pei Wen

AU - Ou, Keng Liang

AU - Chao, Chih Yeh

AU - Pan, Yung Ning

AU - Wang, Chau Hsiang

PY - 2010/2/4

Y1 - 2010/2/4

N2 - The microstructure and mechanical behavior of the duplex Ti-4.8Al-2.5Mo-1.4V (Ti14) alloy were investigated by means of optical microscopy, electron microscopy, experimental model analysis, and hardness and tensile testing. During heat-treatment at between 600 and 1000 °C, the phase transformation sequence was found to be (α + β) → (α + β + α′) → (α′ + α″ + residual β). The (α′ + α″ + residual β) structure exhibited the maximum yield strength (σy = 920 MPa), hardness (HRC 36), and damping coefficient (188.3 × 10-4). However, the (α + β) structure achieved the greatest elongation (∼15%). It is believed that the lath-like α′ martensite not only increases the tensile strength, but also enhances the hardness of the Ti14 alloy. Moreover, it also plays a crucial role in increasing the damping capacity of the Ti14 alloy.

AB - The microstructure and mechanical behavior of the duplex Ti-4.8Al-2.5Mo-1.4V (Ti14) alloy were investigated by means of optical microscopy, electron microscopy, experimental model analysis, and hardness and tensile testing. During heat-treatment at between 600 and 1000 °C, the phase transformation sequence was found to be (α + β) → (α + β + α′) → (α′ + α″ + residual β). The (α′ + α″ + residual β) structure exhibited the maximum yield strength (σy = 920 MPa), hardness (HRC 36), and damping coefficient (188.3 × 10-4). However, the (α + β) structure achieved the greatest elongation (∼15%). It is believed that the lath-like α′ martensite not only increases the tensile strength, but also enhances the hardness of the Ti14 alloy. Moreover, it also plays a crucial role in increasing the damping capacity of the Ti14 alloy.

KW - Damping coefficient

KW - Mechanical properties

KW - Microstructure

KW - Titanium alloy

KW - Transmission electron microscopey

UR - https://www.scopus.com/pages/publications/74149087060

UR - https://www.scopus.com/inward/citedby.url?scp=74149087060&partnerID=8YFLogxK

U2 - 10.1016/j.jallcom.2009.10.133

DO - 10.1016/j.jallcom.2009.10.133

M3 - Article

AN - SCOPUS:74149087060

SN - 0925-8388

VL - 490

SP - 661

EP - 666

JO - Journal of Alloys and Compounds

JF - Journal of Alloys and Compounds

IS - 1-2

ER -

Research of microstructure and mechanical behavior on duplex (α + β) Ti-4.8Al-2.5Mo-1.4V alloy

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this