Elucidating the role of current injection on the influence of open-circuit voltage in small-molecule organic photovoltaic devices: From the aspects of charge transfer and electroluminescent spectrum

We demonstrate that the open-circuit voltage (V_OC) of organic photovoltaic (OPV) devices composed of rubrene and C₆₀ can be considerably different when the anode and active layer are changed. Two types of anodes and active layers were compared. In plasma-treated indium-tin-oxide (ITO) OPV devices, the parameter V_OC exhibits an improvement from 0.68 V to 0.76 V when the device structure is varied from a bilayer to a mixed structure. However, in the OPV devices that use ITO/MoO₃ as the anode, a similar V_OC is observed regardless of the device structure. A series of temperature-dependent measurements are conducted to investigate these results. The calculation of barrier height at the rubrene/C₆₀ (or rubrene:C₆₀) interface yields the prediction of V_OC, suggesting that an excess energetic loss occurs in the mixed structures. The electroluminescent (EL) spectra of these devices show that the mixed structure can completely quench the EL of rubrene single layer. A broad band of the charge transfer (CT) emission is observed clearly. A temperature-dependent measurement for the extracting injection barrier is conducted and shows that the mixed structure is favorable for the hole current injection. The CT properties are obtained using the external quantum efficiency and EL spectra of the OPV devices. We find that the nonradiative recombination loss is highly correlated with the injected current; the lower the injection barrier induced the less the nonradiative recombination loss. Therefore, the parameter V_OC can be improved when the injected current is increased.