BiFeO ₃ /YSZ bilayer electrolyte for low temperature solid oxide fuel cell

We have demonstrated BiFeO ₃ (BFO) as a potential bilayer electrolyte for 650°C low temperature solid oxide fuel cell application. The stoichiometric perovskite BFO is synthesized by wet chemistry, calcined at 500°C and sintered at 850 °C. The crystalline structure is confirmed by X-ray diffraction spectroscopy, the atomic ratios (Bi:Fe) of 1.02 and 1.00 are determined by X-ray energy dispersive spectroscopy and inductively coupled plasma-mass spectroscopy, respectively. The X-ray photoelectron spectroscopy analysis indicates the presence of oxygen vacancies which can partially reduce Fe ³⁺ and result in relatively high dielectric constant (6252 at 100 kHz) and ionic conductivity (>10 ^-2 S cm ^-1 at 650 °C). The BFO is coated with an yttria-stabilized zirconia (YSZ) protective layer to avoid hydrogen reduction of BFO. This bilayer electrolyte exhibits a 1.6 times increase in maximum power density as compared with pure YSZ when a Ni-YSZ anode and lanthanum strontium cobalt ferrite (LSCF) cathode are used in the fuel cell at 650 °C.